Home Insulation Before & After Photos

This home in Greenwich, CT had old insulation that just wasn't doing the job. It was causing the owner's energy bills to rise, and their home was cold when it should've been warm! They gave us a call at Dr. Energy Saver of Connecticut, and we were happy to come out, and see what we could do to solve the problem!

Our Home Comfort Specialist, Keith Saunders, surveyed the space, and quickly realized what needed to be done. He called on Dan Kiley, and he came out to install new insulation in the home. After removing all of the old insulation, Dan and his comfort crew installed our closed cell spray foam. This two part foam has a high R-value per inch, seals any air leaks, forms a moisture barrier, and absorbs sound. It works so well that it cut this family's energy bills in half!

If you're looking to solve your own home energy problems, give us a call at Dr. Energy Saver of Connect for your FREE energy evaluation!

These Riverside, CT homeowners reported incredibly cold floors in the second floor of their home where the second level cantilevers slightly over the first. We sent one of our most knowledgeable home comfort experts Keith Saunders to the home in order to see what to do with the issue. The reason why this cantilever was allowing to much heat out of the home was because it had a layer of rigid foam insulation that was not air sealed, so it was allowing heated air to escape.

Keith recommended we install sprayable foam insulation between the floor joists that are cantilevering outward. This was done by our crew lead by Rudy Abel. They removed the siding underneath to expose the cavities then installed three inches of the foam to reach an R-value of about R-12. The closed cell foam expanded to fill all the gaps in the floor joists which will prevent heated air from escaping through this access point again.

The homeowners noticed right away the floors on the second floor were not nearly as cold as they had been in past winters! They continued to have additional insulation installed in their attic by Dr. Energy Saver of Connecticut.

A homeowner located in Stamford, CT expressed interest in improving his crawlspace's insulation. With old fiberglass insulation hanging from the subfloor and floor joists, the homeowner expressed issues with cold floors during winter months. To remedy his concerns, he reached out to the experts at Dr. Energy Saver for assistance.

Upon calling, the homeowner made contact with Jimmy Stablein, scheduling a free in-home consultation. Shortly after, Stablein arrived at the home, mapping out the crawlspace and offering potential solutions. Following his visit, Stablein assembled a proposal documenting his suggestions for how to improve the crawlspace's insulation situation.

Ultimately, the homeowner landed on spray foam insulation. Offering better insulation properties, spray foam insulation features a better R-value (measure of the effectiveness of insulation) than traditional fiberglass insulation and fills gaps and cracks by expanding into areas it's sprayed.

Shortly after, Foreman Jony Fernandez and his team arrived on-site to begin the installation process. After a quick install, the crawl space was returned to the homeowner with better insulation properties! The homeowner no longer has to worry about chilly floors in the winter.

This Norwalk basement was musty and under insulated, making the entire home drafty and uncomfortable. The homeowner was tired of this and wanted to find a solution, so she decided to call the experts at Dr. Energy Saver of CT for a free home evaluation.

Keith Saunders arrived on the day of the appointment and concluded that the home needed to be properly insulated and have a moisture barrier installed to eliminate the drafts, odor and moisture. The homeowner agreed and wanted to move forward with the insulation process. 

On the day of installation, Johnny Lopez and his production team were more than prepared to install these products. SilverGlo panels were placed on the wall and TerraBlock was installed on the floors to prevent any air leakage. Then, our patented CleanSpace liner was placed on top of the floor insulation to prevent any water vapor entry. Without moisture entering the basement, the musty odors were eliminated and the space became much more comfortable. 

Once the project was finished, the basement was completely transformed. It became much more attractive and efficient for the entire household. The homeowner was no longer plagued by drafts or musty odors in her basement, and she was very glad that she called the experts at Dr. Energy Saver of CT!

Need insulation for your basement? Give us a call at 1-855-201-5406! 

Before, this Norwalk basement had cold, porous walls that let in lots of air and moisture. These walls were an eyesore and made the basement uncomfortable. Wanting a solution for their damp and chilly basement, the homeowner decided to contact Dr. Energy Saver of CT!

After, Dr. Energy Saver of CT was able to solve all of this homeowner’s concerns by using our patented products. BrightWall panels were installed on the walls of the basement to prevent water vapor and moisture entry. This product is both practical and beautiful. The BrightWall panels made the area look and feel more welcoming. This is exactly what the homeowner wanted and they were thrilled with the transformation and results. In the end, our customer was very happy that she contacted the experts at Dr. Energy Saver of CT!