New Haven County, CT's Leading Insulation Company

A Heritage Village home had little to no insulation in the attic which made the summers hot, and the winters cold. The homeowners called us and we made all their worries go away. We took out the old insulation and replaced it with a more effective insulation our expert blown insulation. Our insulation can usually be installed over existing attic insulation, as long as the existing insulation is in good condition. BEFORE installing new attic insulation, it’s critical to seal energy-wasting air leaks between the attic space and the living space below. Insulation slows heat transfer, but will not stop conditioned air from leaking into the attic; that’s why air sealing is always done along with an insulation upgrade. A skilled energy improvement contractor has the know-how to find and seal air leaks using a variety of materials and techniques.

Cellulose insulation is often used in attics because it can be installed quickly and effectively with blowing equipment. Cellullose is super-green: It’s made from recycled newspapers and treated for resistance to fire, mold and insects.

This Wolcott, CT found that they were losing a lot of their paid heat and air, yet their energy bills were spiking high! They gave us a call at Dr. Energy Saver of Connecticut, and we were happy to come help out~ 

We first installed spray foam insulation into the attic. By blowing cellulose insulation into the attic, you are choosing an environmentally friendly insulation made from recyled materials that are treated for fire resistance. Cellulose is blown into the attic or wall cavaties to provide a thick layer of insulation. We also installed Silverglo insulation panels onto the attic walls. These panels are durable, waterproof, and by taping the seams between boards, the technicians create an effective air barrier, providing yet another energy-saving feature. 

This family can now be excited about lower energy bills, and a much warmer home! Give us a call TODAY for your free energy evaluation. 

This home in Moodus, CT was constantly cold inside, but the energy bills the family received said otherwise. They weren't sure why this was happening, and decided it was a time to find a solution. They called us at Dr. Energy Saver of Connecticut, and we were happy to come out!

Our Home Energy Specialist, Keith Saunders, came out and quickly found out that their home's insulation in the attic wasn't up to par. It needed to be removed quickly, so Keith sent out Johnny Lopez and his team to get the job done! They removed all of the old insulation, and then spray foamed the entire attic with closed cell spray foam. This insulation adds strength to framing and sheathing, seals off air infiltration, and it blocks and absorbs sounds. It has great resistance to air and water vapor, and best of all? Reduces your energy costs!

This family can now relax comfortably in their home! Give us a call TODAY for your FREE energy evaluation!

This Guilford attic was poorly insulated which caused uneven temperatures throughout the house and a high electric bill. Not only was their home uncomfortable, but they had a concern for mold in their attic. The homeowners wanted a solution for their uncomfortable home, so they decided to give Dr. Energy Saver of Connecticut a call.

Our Home Comfort Advisor, Keith Saunders, arrived at the home the day of the appointment. After his evaluation, he concluded that in order to properly insulate the attic, blown cellulose and panels of SilverGlo would solve the uneven temperature problem. He also suggested to use Mold-X2 Cleaner to prevent any mold growth in the attic. The homeowners appreciated the suggestions and agreed to have the products installed. With no time to waste, Rudy Abel and his production team quickly went to work.

First, they removed any existing insulation in order to have a fresh start. Then, they air sealed the entire attic to ensure that no air leakage would be able to flow through the attic. In order to prevent any mold growth, the production team applied the Mold-X2 to the walls of the attic to prevent any mold growth. Once that was done, SilverGlo interior wall panels and Blown-In Cellulose were installed to prevent uneven temperatures and to keep the home properly insulated. 

Once all the work was done, the homeowners were left with a cleaner, healthier home and noticed that they now had a lower electric bill. They were ecstatic with the results and appreciated that Dr. Energy Saver of Connecticut was able to solve all of their home comfort concerns. 

Want a comfortable home? Call Dr. Energy Saver of Connecticut today for a FREE home evaluation! 1-855-201-5406

This Ansonia attic was poorly insulated which caused an uncomfortable home for the homeowners. When there is a lack of proper insulation in a home, it causes uneven temperatures throughout the entire home. A room can be warmer or cooler than others. This was the problem that these Ansonia homeowners were experiencing and were seeking a solution. They did their research and knew that Dr. Energy Saver of Connecticut would be the best company to provide a solution. 

On the day of the appointment, Chris Grosso arrived at the home to give an evaluation of the attic. He concluded that the attic would do best with Blown-Cellulose rather than traditional batt insulation. Chris explained the benefits of Blown-Cellulose to the homeowners and they agreed that this would be the perfect solution for their home. 

On the day of installation, Rudy Abel and his production crew installed the Blown-Cellulose professionally and efficiently. Blown-Cellulose is the perfect option for this attic because this blanket of insulation creates a thermal barrier to keep the home more comfortable and efficient. Not only will this product give these homeowners a comfortable home, but it is also quick to install, safe, and environmentally friendly. 

The homeowners were extremely happy with the product and enjoy a more comfortable home thanks to Dr. Energy Saver of Connecticut! 

Do you have an uncomfortable home? Dr. Energy Saver of Connecticut can provide you a solution! Just give us a call for your FREE estimate! 1-855-201-5406

This Orange, CT home had a problem of uneven temperature throughout their home, especially in their sunroom. Wanting to enjoy their sunroom all year around (which is what the room is made for) the homeowner wanted to properly insulate the area. After doing a lot of research, she decided to give Dr. Energy Saver of CT a call to set up an appointment for a free evaluation.  

On the day of the appointment, Sales Representative Chris Grosso arrived at the home to inspect the problem. He concluded that the lack of insulation was the cause of uneven temperatures in the sunroom compared to the rest of the home. Dense-packing cellulose would be the perfect solution for this problem. After Chris explained the benefits of dense-packing, the homeowner moved forward with the installation process. 

On the day of production, Rudy Abel and his production team installed the dense-packing cellulose. Cellulose is insulation that acts as a thermal barrier which will keep an area comfortable at all times. Dense-packing just means that they take this insulation and pack it into the structure of the walls. This will insulate the space properly which will stabilize room temperatures. This is exactly what the homeowner wanted and was very pleased with the final project. She now enjoys her sunroom all year around thanks to Dr. Energy Saver of Connecticut.  

Interested in Dense-packing cellulose? Give us a call for your FREE home evaluation 1-855-201-5406

This Hamden crawlspace was dirty, cold and seeped in a lot of moisture. These problems with the crawlspace was affecting the entire home. The homeowner wanted to find a solution that would solve these problems and decided to call Dr. Energy Saver of CT to help find a solution. 

On the day of the appointment, our Sales Representative Keith Saunders arrived at the home to give a free home evaluation. After evaluating the crawlspace, he concluded that SilverGlo insulation panels, CleanSpace Liner, and Spray Foam would be the perfect solution for this crawlspace. He explained the benefits of each products. The SilverGlo will keep the entire crawlspace insulated, preventing air leakage. The CleanSpace will act as a moisture barrier that will prevent any water seepage from entering the basement. Installing Spray Foam to the rim joists and beams will ensure that no outside air will travel to the basement. 

The homeowner agreed that this would be the perfect solution for her crawlspace. On the day of production, Rudy Abel and his team arrived at the home to install the products. Rudy and his team installed the products professionally and efficiently. The homeowner was impressed with how well all the products worked together and was happy with the transformation. Now her crawlspace is clean and dry which affects her entire home positively! 

This West Haven attic was under insulated which caused for an uncomfortable home. The homeowner was tired of paying a high electric bill every month for a home that was not even heated properly. Frustrated, she decided to call Dr. Energy Saver of Connecticut to find a solution. 

On the day of the appointment, Sales Representative Jeremy Bossio arrived at the home to inspect the situation. He concluded that the attic would need to be properly insulated. He recommended that blown cellulose should be installed to improve the home’s efficiency. Jeremy explained the benefits of Blown Cellulose and how effective it was. Blown Cellulose insulation offers a superior R-value compared to traditional fiberglass batts, which will immediately improve the efficiency of the home. This is exactly what the homeowner had wanted and decided to move forward with the project.

On the day of installation, Rudy Able and his team installed the Blown Cellulose efficiently and professionally. Once completed, the basement was transformed. The homeowner was impressed with the product and instantly noticed a difference in both the efficiency in the home and through the electric bill. This homeowner was one happy customer with Dr. Energy of Connecticut services. 

This Branford homeowner was concerned with uneven temperatures throughout her home and assumed her attic was poorly insulated. She called Dr. Energy Saver of Connecticut, who had home energy specialist Keith Saunders figure out the issue. He confirmed that not only was her attic poorly insulated, but her air ducts were leaky, there were several areas around the ducts that were completely uninsulated, and the cantilevered area over the kitchen was not insulated.

The Dr. Energy Saver of Connecticut team, lead by foreman Rudy Abel, removed all the poorly performing fiberglass batts insulation and installed one metal chimney wrap with rockwool as well as installing TruSoft blown in cellulose. They put a cap over the open kitchen soffit and installed additional insulation to the attic adjacent wall and sealed, then encapsulated the air ducts located in the attic.

The homeowner was immediately more comfortable in her better insulated home and will soon start saving big on her fuel and electricity bills!

John P., a North Branford homeowner, communicated with several other contractors looking to have his attic air sealed and further insulated. His attic was originally filled with roofing debris and in need of upgraded insulation.

The Dr. Energy Saver team, led by foreman Johnny Lopez, first removed all the underperforming fiberglass batts insulation and sealed all air gaps throughout the attic, which makes sure no conditioned/heated air within the home can escape. This included installing 20 can light caps to keep air from passing through the holes. Next, they sprayed between the joists on the underside of the roof with an inch of Spray Foam which will help prevent future roofing debris from littering the attic and forms an air-tight layer of insulation throughout the entire space. The entire adjacent interior wall was insulated with several panels of SilverGlo rigid insulation, which includes a layer of radiant barrier that both protects the inside of the attic and home from harsh outside temperatures and contains conditioned or heated air within. After all this air sealing and insulating, the homeowner and our team decided their attic needed one additional blanket of protection, so our production team installed a thick layer of blown in TruSoft cellulose.

Now this homeowner has an incredibly well-insulated attic and has already been experiencing big perks, including improved comfort and lower heating and cooling costs!

These Prospect, CT homeowners were living in an older cap cop style home. They were sure that because of its age, their exterior walls desperately needed an insulation upgrade. Their house had always been humid in the summer and cold in their winter, and knowing they never had enough insulation for the time they’ve been living there, they realized it had gone on for too long. They finally called Dr. Energy Saver of Connecticut and asked to meet with one of our Home Energy Specialists.

Our crew, lead by Rudy Abel, came out to their house to start work. They decided with the homeowner that the best service to install is our TruSoft densepack cellulose. This product is installed by removing minimal strips of siding, drilling holes into the plywood layer, and installing pressurized cellulose into the cavities. For this home, the crew had to remove 33 pieces of siding and drilled a total of 225 holes in order to inject the cellulose into every nook inside the walls. It took two entire days and we sent out extra crew members as reinforcements in order to complete the job on time. The house’s walls were very old and weak, made from old paneling, so there were a couple times the panels could not handle the pressure of the cellulose, so the crew fixed them to be as good as new!

After all the walls were densely packed, the crew plugged up the holes and re-installed the siding. The homeowners expressed it seemed like they were living in a completely different home! They already noticed a difference in how the insulation retained their conditioned air during the summer and soon they will save big on their future heating and cooling bills.

This North Haven, CT attic is primarily used as a storage area, however, the existing insulation failed to maintain consistent temperatures. This made it unsuitable for storing items in their attic, so the homeowners called Connecticut Basement Systems. After speaking with Sales Consultant, Keith Saunders, they decided to proceed with the insulation and air-sealing process. Foreman, Jony Fernandez, and his team began by removing the old insulation and installing the complete Attic SuperDeck. This solution provided a stable walking surface and suitable storage space. Next, our team air-sealed the entire attic before blowing in our high-quality TruSoft Cellulose insulation. As a result, these enhanced temperature control and energy efficiency. These homeowners were delighted with the work done and can now enjoy a more comfortable and practical attic space while safeguarding their valuable possessions.  

These homeowners in North Haven, CT called Connecticut Basement Systems to find a solution for their attic that struggles to maintain a consistent temperature due to its ineffective insulation. After consulting with Sale Consultant Keith Saunders, they opted to commence the insulation and air-sealing process. Foreman, Jony Fernandez, and his dedicated crew began by removing the old insulation and installing the Attic SuperDeck. This provided a reliable walking surface while also creating a suitable storage area. Thoroughly addressing the attic’s needs, our team proceeded to air-seal the entire space and then blew our TruSoft Cellulose insulation. This attic is not temperature controlled and has improved energy efficiency. Homeowners were pleased with our work and can now confidently store their belongings while safeguarding them from temperature fluctuations.

Located in North Haven, CT, this attic faced challenges in maintaining consistent temperatures due to its poor existing insulation. Recognizing the need for a solution, the homeowners sought the expertise of Connecticut Basement Systems. After speaking with Sales Consultant, Keith Saunders, they made the decision to insulate and air-seal their attic. Foreman, Jony Fernandez, and his team commenced the project by removing all existing insulation and installing the complete Attic SuperDeck system. This provided homeowners with a safe walking surface while using this space primarily as a storage area. Our team proceeded by air-sealing the entire attic, creating an airtight environment. This allowed our team to blow our TruSoft Cellulose insulation, resulting in an incredible transformation. The attic experienced a significant improvement in temperature control and energy efficiency, making it more comfortable. These homeowners were very satisfied with our work as their attic became an ideal storage area, free from concerns about potential damage caused by temperature variations.

This North Haven, CT attic suffered from poor insulation and inadequate air sealing, leading to uncomfortable temperature variations and energy inefficiency. However, after contacting Connecticut Basement Systems and speaking with our Sales Consultant, Keith Saunders, these homeowners were ready to air-seal and insulate their attic. Foreman, Jony Fernandez, and his crew got right to work, by air-sealing the entire attic and installing TruSoft Cellulose insulation. This provided superior thermal performance, reducing energy waste and lowering utility bills. With improved insulation and air sealing, the attic became a more efficient and enjoyable space, contributing to the overall comfort and energy efficiency of the entire home throughout the year!

Before, this attic in North Haven, CT suffered from temperature inconsistencies and energy inefficiencies. Air leaks and poor insulation allowed for heat loss in the winter and heat gain in the summer, making the attic uncomfortable and causing high energy bills. However, after reaching out to Connecticut Basement Systems Sales Consultant, Keith Saunders, these homeowners were ready to start the insulation and air-sealing process. Foreman, Jony Fernandez, and his team thoroughly air-sealed the attic, eliminating any gaps and cracks that allowed air infiltration. Then, they blew our TruSoft Cellulose insulation, creating a seamless thermal barrier that improved temperature control and energy efficiency. The attic became a comfortable and energy-efficient space, with reduced heat loss and gain. The homeowner enjoyed lower energy bills and a more pleasant environment, thanks to the air-sealing and insulation provided by Connecticut Basement Systems.

This homeowner in Hamden, CT had existing insulation in their attic and was looking to make a change. The previous insulation was causing outside air in and letting inside air out, making their energy bill high. After contacting us, our Sales Representative Keith Saunders went out to estimate the issues at this home. The solution was Dr. Energy Saver of CT. Our team came in and blew in our TruSoft Cellulose to create a thermal barrier. The attic is now insulated properly so the air isn't coming out of the home and is more energy efficient. Now this customer doesn't have to worry about wasting any energy on a poorly insulated attic. The temperatures will stay stable in their home!

A homeowner in Hamden, CT had two attic spaces that were poorly insulated, causing warm air to seep out of the home. They decided it was time to call Dr. Energy Saver of CT and schedule an appointment. After that, our Sales Consultant Keith Saunders drove out to the home to estimate the issues. He informed them that would need to completely re-insulate both spaces. One of our foremen, Jony Fernandez, and his team got to work on the project. They blew in TruSoft Cellulose in one of the spaces and installed Foamax insulation in the other space. These would both keep the home's temperature more regulated and make it energy efficient. The homeowner was thrilled with the results and can watch their energy bill drop!

This homeowner in Seymour, CT had a poorly insulated attic and called us at Dr. Energy Saver of CT to solve their problem! One of our salesmen, Joe Schech, went out to the home to inspect the issues. He informed them that the attic was letting out warm air and cold air was seeping in, causing the home to be energy inefficient. One of our foremen Moises Guevara, and his crew went out to work on this project. They removed the old insulation and then blew in our TruSoft Cellulose insulation. This would act as a thermal barrier and keep the attic energy-efficient. Now this attic will regulate the home's temperature and it will save the homeowner's money on their energy bill! Right in time for the cooler weather!

This homeowner in Branford, CT had existing insulation in their attic that was causing their home to be energy inefficient. They called us at Dr. Energy Saver of CT and we sent out one of our Sales Consultants, Mike Bourdeau, to the home to assess the issues. He informed the homeowner that they would need to have new insulation put in. One of our Foremen, Rudy Abel, and his crew, got to work on this project. They removed the old insulation that was causing warm air to seep out. Then, they blew in our TruSoft Cellulose that would act as a thermal barrier to keep the temperature regulated correctly. Now this homeowner can live worry-free knowing their home is energy efficient and their energy bills will go down! 

A homeowner in Hamden, CT had existing insulation in their attic that was causing the home to be energy inefficient. They made the right decision and called us at Dr. Energy Saver of CT to solve their problem. After scheduling an appointment, one of our Sales Consultants, Mike Bourdeau, went to the home to estimate their issues. He informed them that they would need our TruSoft Cellulose Insulation to stop warm air from getting out and cool air from seeping into the attic. The next step would be for our crew to get to work. One of our Foremen, Rudy Abel, and his team would take on this project. They would start by removing the old insulation, then they blew in our TruSoft Cellulose insulation. This will act as a thermal barrier, keeping the home comfortable and regulating the temperature. This homeowner can enjoy their energy-efficient home and see a drop in their energy bill!

A homeowner in Derby, CT had existing insulation in their attic that was causing the temperature in their home to not be regulated properly. Cold air was seeping in and warm air was going out of the home, making their energy bill increase. They decided to call us at Dr. Energy Saver of CT to help fix this problem.

After scheduling an appointment, one of our Sales Representatives, Joe Schech, went to the home to estimate the issues. He informed them that they would need our blown-in insulation to regulate the home's temperature.

Then it would be time for one of our Foremen, Jony Fernandez, and his crew to get to work on this project. They removed some of the old insulation in the attic and then they blew in our TruSoft Cellulose insulation. This would act as a thermal barrier to keep the warm air in the home. They made this attic easily accessible by adding a catwalk. Now this homeowner can watch their energy bill go down and actually feel the results get better. 

A homeowner in Cheshire, CT had an attic that was not properly insulated, causing the home to be energy inefficient. They decided to call us at Dr. Energy Saver of CT to come save the day. After scheduling an appointment, one of our Sales Consultants, Keith Saunders went out to the home to estimate the issues. He informed them that they would need to have our crew use our blown-in insulation to ensure the home would become energy-efficient. 

One of our foremen, Rudy Abel, and his team would work on this project. They first removed some of the existing insulation that was in the attic. Then they build a catwalk so that the attic will be easily accessible going forward. They then belew in TruSoft Cellulose insulation. This would act as a thermal barrier to the home, keeping it warm in the cold months. No cold air can seep in and no warm air can get out, thus making the home energy-efficient. Now this homeowner can watch their energy bill drop!